We have successfully completed the Nuclear chimneys and platforms, which we have undertaken the manufacturing and assembly works.
Borusan Mannesmann There are cooling rolls at the exit of the Pipe Manufacturing Line. After manufacturing has been completed, pipe temperature is around 900°C and needs to be cooled down. To cool the pipes down, 56 rolls have been used. Each roll has 120 rings with > 50HRc hardness. Rings are manufactured by turning machine and inducted to […]
For the pipes produced with precision and care for the automotive industry, the same sensitivity should be made during storage and shipment. The production and installation of the 1500 ton capacity stock areas, designedby taking into consideration of safety precautions, has been completed. Welding points have been checked with the NDT Test as it is […]
We, Focus Engineering Co., aware the importance of quality in factory control system. We have the capacity to produce quality products in all manufacturing processes. Our quality certificates are;ISO 9001-2015 (Quality Management System)ISO 3834-2 (Quality Requirements for Fusion Welding of Metallic Materials)EN 1090-2 (Conformity of the Factory Production Control)
ENKA Holding-Çimtaş steel works are carried out by Focus Engineering Co. There are 3 main projects that he runs with. 1-Canakkale Lapseki Bridge, 2-Wind Tower Production, 3-Pressure Tank Production, As Focus Engineering Co, we actively support the project as engineers, welders and manufacturers.
In Gemlik Fertilizer production area, there are tanks with a diameter of 40 m and a height of 15 m where water is stored. Carbon steel strips are placed on the bottom and side walls of the tank. Because the strips deformed over time, they have been re-coated with strips of 8-10 mm thickness. The […]
In the Iron-Steel Sector, there are chain conveyors for transporting pipes of different diameters. Main part, chains and gears are manufactured by Focus Engineering Co. for Borusan Pipe/USA. By applying heat treatment to the chains and gears, the surface hardness is increased and the machine has a longer service life.
Coil cars are used for the transportation of rolled strips from one hall to the other or loading / unloading the mandrel. 20 tonnes capacity coil car manufacturing, field assembly and electrical/ automation works were done by Focus Engineering Co.
Castermid shell is used to expand the mandrel diameter at the line inputs and outputs.The damaged Mandrel Sleeve was processed by taking full cut-out material and assembled at the customer site.
Just after the mechanical production of the lines were completed, the assembly at the customer site was completed by our experienced team with equipment such as Nivo / Theodolite. Mechanical installation of Galvanizing Line in Borusan Mannesmann Gemlik Factory was done by Focus Engineering Co.